Back on track with your cases
across your team inboxes.
YI reorganizes the email stream into structured cases.
The team works faster, you get your answers.
Zero changes, zero integrations, zero setup.
Just connect your first team inbox.
Connect → Only you can access your data.
For Microsoft Outlook users
YI Cases brings structured case information alongside your email in Outlook. A case follows a business matter across related conversations: a customer request, a separate exchange with Production and a supplier reply can contribute to the same case. The case is more than a summary of the currently selected email thread.
YI uses the communications received through connected mailboxes to create or update cases. It does not imply access to every employee inbox or to conversations that have not reached YI. The case keeps the available facts, current status, open decisions and relevant sources together.
What the interactive Outlook demo shows
- Choose Support, Sales or Suppliers and select an email. The YI pane shows its associated case.
- Enable or disable YI Cases in Outlook. Closing the pane gives the email list more width; opening it restores the structured case alongside the same correspondence.
- Independently enable or disable Assignments in Outlook. Colored categories in the email list identify the illustrative team member responsible. These are labels, not edits to email bodies.
- Read the contributions from other conversations, then follow a source or choose Show all to see the case emails. Switching source emails does not turn each thread into a separate case.
- Expand the case details to inspect further fields, calculations and example automation outcomes. On mobile, tap the preview to enter the full-screen illustration; use Mail, YI add-in and Exit in the bottom bar.
How to read these examples
In Support, a customer reports a faulty unit, Production confirms a replacement is available, and the supplier verifies compatibility. The case still shows the required Operations approval. In Sales, customer requests and separate internal checks inform an offer while approval remains a separate decision. In Suppliers, transport quotes, operational constraints and documentation inform delivery and approval status.
The following 13 cases expose the information available through every mailbox and case selection. All names, messages, assignments, dates, amounts and automation outcomes are fictional demonstration data. The demo performs no real analysis, email sending, assignment, approval or integration. The mobile illustration is not a claim of current Outlook mobile add-in support; see the client requirements in the Outlook guide. Illustrated calculations and automations are examples, not a guarantee that those workflows are configured for every account. Approval requested does not mean approval granted; a requested delivery date is not a confirmed delivery date.
Support — support@acme.com
CASE-0412 — Brightwood Interiors
Status: Replacement due
Illustrative category in the email list: Tom Reyes
6 email entries · 16 messages
YI also brings together what Production and the Supplier shared in separate conversations.
- Production: Replacement ready; dispatch awaits Operations approval.
- Supplier: Replacement module compatible with the customer’s serial number.
- Customer
- Brightwood Interiors
- Opened
- 11 Jun 2026
- Issue
- Control unit fails intermittently; second report this month. Customer requests a warranty replacement, not another repair.
- Severity
- High
- Order & serial
- ORD-48120 · SN-220719 · X200-EU
- Replacement stock
- X200-EU ready; dispatch awaits Operations approval
- Compatibility
- Supplier confirmed compatibility with SN-220719
- First-response SLA
- 2h overdue
- sla_due = opened_at + target(severity)
- severity = "High" → 4h target
- now − sla_due = +2h 10m
auto: Recomputed when the case was reopened · 11 Jun 10:20
- Customer update
- Auto-sent on status change
- on status → "Replacement due"
- channel: reply to customer thread
done: Email sent to hannah.brooks@brightwoodinteriors.com · 11 Jun 10:25
- Proof of purchase
- Invoice 48120 received
- if warranty_claim and no receipt on file
- ask: customer for proof of purchase
done: Invoice received from the customer · 11 Jun 10:24
- Replacement approval
- Warranty swap needs ops sign-off
- if action = "warranty replacement"
- approver: operations manager
pending: Approval requested from ops@acme.com · awaiting
- Helpdesk sync
- Posted to helpdesk API
- POST /helpdesk/tickets
- map: report fields → ticket
done: Synced to ticket #HD-22841 · 11 Jun 10:26
All source emails in this illustrative case
Re: faulty control unit — again
From hannah.brooks@brightwoodinteriors.com to support@acme.com · 11 Jun · 10:19
Hi,
this is the second time the control unit has failed on us this month — the same intermittent fault as before. We followed the reset steps in your last email, but it keeps cutting out.
The unit is still under warranty (purchased in March, model X200-EU). Could you arrange a replacement rather than another repair? We can't keep the showroom display offline.
Thanks,
Hannah Brooks — Brightwood Interiors
Re: serial SN-220719 check
From tom.reyes@acme.com to support@acme.com · 11 Jun · 10:21
Confirmed the serial SN-220719 against our records — unit X200-EU, shipped March, warranty active until next March. Eligible for replacement.
Tom
Fwd: warranty claim #X200
From tom.reyes@acme.com to ops@acme.com · 11 Jun · 10:23
Team,
escalating this — Brightwood Interiors' control unit (order ORD-48120) is down again, second failure this month. Their showroom display is offline, so I've flagged it High.
The customer wants a straight warranty replacement, not another repair. Can ops approve the swap?
Tom
Proof of purchase — invoice 48120
From hannah.brooks@brightwoodinteriors.com to support@acme.com · 11 Jun · 10:24
Hi,
as requested, attaching the invoice (no. 48120) as proof of purchase for the control unit. The case was opened this morning. Let me know if you need anything else to process the warranty.
Hannah Brooks — Brightwood Interiors
X200-EU replacement availability — Brightwood showroom
From production@acme.com to support@acme.com · 11 Jun · 10:22
Hi Tom,
we have an X200-EU unit ready in stock for the Brightwood Interiors showroom. We can prepare the replacement once Operations approves the warranty exchange.
Stock is confirmed; dispatch still awaits approval. No delivery date has been promised to the customer.
Production — Acme
Module compatibility — serial SN-220719
From technical@northcomponents.example to support@acme.com · 11 Jun · 10:23
Hello,
we have checked serial SN-220719 for the X200-EU controller. The available replacement module is compatible: no adapters or installation changes are needed.
This confirms technical compatibility only. Acme still needs to authorize the warranty replacement.
Technical team — North Components
CASE-0408 — Maple & Co
Status: Awaiting reply
Illustrative category in the email list: Emma Clark
4 email entries · 4 messages
YI connects the customer’s request with separate Product and IT checks, distinguishing open questions from confirmed causes.
- Product: X200 pairing requires a 2.4 GHz network.
- IT: Router configuration requested; reply still pending.
- Customer
- Maple & Co
- Opened
- 11 Jun 2026
- Issue
- Setup question on model X200 — the initial pairing step doesn't complete; the unit isn't detected.
- Severity
- Normal
- Order & serial
- ORD-47980 · SN-219004 · X200-EU
- Network requirement
- 2.4 GHz Wi-Fi; cause still under investigation
- Open check
- Awaiting the customer’s Wi-Fi configuration
- First-response SLA
- 6h left
- sla_due = opened_at + target(severity)
- severity = "Normal" → 8h target
- due = 09:05 + 8h = 17:05
auto: Recomputed on case open · 11 Jun 09:05
- Acknowledgement
- Auto-sent to the customer
- on case open
- channel: reply to customer thread
done: Email sent to r.maple@mapleco.com · 11 Jun 09:06
- Suggested KB
- KB-X200-SETUP matched and sent
- match issue text → KB article
- attach: KB-X200-SETUP
done: Article sent with the acknowledgement · 11 Jun 09:06
- Draft reply
- Prepared, awaiting review
- draft reply from KB-X200-SETUP
- ask: agent to review and send
pending: Awaiting agent review
All source emails in this illustrative case
X200 setup problem
From r.maple@mapleco.com to support@acme.com · 11 Jun · 09:04
Hi, we've received the X200 (order ORD-47980, serial SN-219004) but can't complete the initial pairing — the unit isn't detected at the pairing step. Can you help? Thanks, Rachel Maple — Maple & Co
Acknowledgement — CASE-0408
From support@acme.com to r.maple@mapleco.com · 11 Jun · 09:06
Hi Rachel, we've logged your request (CASE-0408) and will reply today. In the meantime here's the KB-X200-SETUP guide, which covers the pairing step. Support — Acme
X200 pairing requirements — Maple & Co
From product@acme.com to support@acme.com · 11 Jun · 09:06
Hello,
The X200 with serial SN-219004 must be paired over 2.4 GHz Wi-Fi, as described in KB-X200-SETUP. This is a setup requirement, not confirmation of what caused Maple & Co’s issue.
Product
Network check for initial pairing — Maple & Co
From it@acme.com to support@acme.com · 11 Jun · 09:06
Hello,
We have asked Maple & Co whether the router uses one name for both 2.4 and 5 GHz networks. The configuration has not arrived yet. The support draft is ready for review, but pairing is not confirmed as resolved.
IT
CASE-0405 — Garrison Supplies
Status: Return in progress
Illustrative category in the email list: Sarah Reed
5 email entries · 5 messages
YI combines the refund request, the Warehouse check and the separate Finance approval.
- Warehouse: Picking error confirmed; returned unit not received yet.
- Finance: €1,240 refund verified; authorization still pending.
- Customer
- Garrison Supplies
- Opened
- 10 Jun 2026
- Issue
- Wrong item shipped (X150 delivered instead of the ordered X200); customer requests a return and refund.
- Severity
- Normal
- Order & serial
- ORD-47860 · SN-218742 · X150-EU
- Warehouse check
- X150 shipped; RMA-3320 return still expected
- Refund conditions
- Return receipt and Finance approval before payment
- Refund amount
- €1,240
- refund = item_price
- item_price from price list v12 = €1,240
auto: Computed from price list · 10 Jun 15:10
- Return label
- Generated and sent to the customer
- on return opened
- channel: email to customer
done: Label sent to p.garrison@garrisonsupplies.com · 10 Jun 15:20
- Refund approval
- Refunds >€1,000 need finance sign-off
- if refund > €1,000 (here €1,240)
- approver: finance
pending: Approval requested from finance@acme.com · awaiting
- ERP posting
- Return opened via the orders API
- POST /erp/returns
- map: case fields → RMA
done: Synced to RMA-3320 · 10 Jun 15:21
All source emails in this illustrative case
Wrong item on order ORD-47860
From p.garrison@garrisonsupplies.com to support@acme.com · 10 Jun · 14:58
Hi, on order ORD-47860 we received an X150 (serial SN-218742) instead of the X200 we ordered. We'd like to return it and get a refund. Thanks, Paul Garrison — Garrison Supplies
Price check — X200 (price list v12)
From support@acme.com to support@acme.com · 10 Jun · 15:10
Confirmed the item's list price: €1,240 (price list v12). Refund amount matches.
Return label — RMA-3320
From support@acme.com to p.garrison@garrisonsupplies.com · 10 Jun · 15:20
Attached is the return label (RMA-3320). Once the item is received we'll process the €1,240 refund, pending finance approval. Support — Acme
Picking check ORD-47860 — Garrison Supplies
From warehouse@acme.com to support@acme.com · 10 Jun · 15:20
Hello,
The picking record confirms that X150 SN-218742 was shipped instead of the X200 on order ORD-47860. The RMA-3320 return label was issued, but the unit has not arrived back. Receipt must be recorded before the refund.
Warehouse
Refund authorization RMA-3320 — Garrison Supplies
From finance@acme.com to support@acme.com · 10 Jun · 15:20
Hello,
The refund amount is €1,240, consistent with price list v12. Since it exceeds €1,000, Finance approval is required and remains pending. No payment has been made; the return must also be received and checked.
Finance
CASE-0401 — Hartley Group
Status: Diagnosing
Illustrative category in the email list: Tom Reyes
5 email entries · 5 messages
YI brings together the customer’s report and separate Engineering and Quality investigations, keeping hypotheses distinct from confirmed findings.
- Engineering: Customer logs needed to isolate the reboot cause.
- Quality: Equivalent unit under test; result still pending.
- Customer
- Hartley Group
- Opened
- 10 Jun 2026
- Issue
- Intermittent error after firmware update 2.4.1; the unit reboots on its own.
- Severity
- High
- Order & serial
- ORD-47710 · SN-217650 · X300-EU
- Firmware version
- 2.4.1 (extracted from the email body)
- Technical diagnosis
- ENG-882 open; customer logs still missing
- Lab verification
- X300-EU running firmware 2.4.1 under test
- First-response SLA
- 30m left
- sla_due = opened_at + target(severity)
- severity = "High" → 4h target
- due = 10:40 + 4h = 14:40
auto: Recomputed on case open · 10 Jun 10:40
- Diagnostic logs request
- Sent to the customer
- if reboot issue and no logs on file
- ask: customer for diagnostic export
pending: Requested since 10 Jun 11:00
- Engineering escalation
- Technical ticket opened
- POST /eng/tickets
- severity → High
done: Synced to ticket ENG-882 · 10 Jun 11:05
- Customer update
- Status update sent
- on status change
- channel: reply to customer thread
done: Update sent to it@hartleygroup.com · 10 Jun 11:00
All source emails in this illustrative case
Reboots after firmware update
From it@hartleygroup.com to support@acme.com · 10 Jun · 10:40
Hi, after firmware update 2.4.1 the unit (order ORD-47710, serial SN-217650, model X300-EU) keeps rebooting on its own. This is urgent for our production line. Mark Hartley — Hartley Group
Diagnostic logs request — CASE-0401
From support@acme.com to it@hartleygroup.com · 10 Jun · 11:00
To investigate the reboots we need the unit's diagnostic logs (Settings → Diagnostics → Export). We've also opened a technical review. Support — Acme
Engineering escalation — ENG-882
From support@acme.com to eng@acme.com · 10 Jun · 11:05
Opening technical ticket ENG-882: X300-EU rebooting intermittently after firmware 2.4.1, High severity.
Firmware 2.4.1 reboot investigation — Hartley Group
From engineering@acme.com to support@acme.com · 10 Jun · 11:05
Hello,
ENG-882 is open for X300-EU SN-217650 rebooting after the 2.4.1 update. Without the requested customer logs, we cannot attribute the problem to the firmware or offer a confirmed fix.
Engineering
X300-EU reproduction test — Hartley Group
From quality@acme.com to support@acme.com · 10 Jun · 11:05
Hello,
We have set up an X300-EU on firmware 2.4.1 to try to reproduce the intermittent reboot. Testing is ongoing with no conclusive result yet. The case remains under diagnosis at High severity.
Quality
CASE-0396 — Ridgeway Stores
Status: Resolved
Illustrative category in the email list: Sarah Reed
4 email entries · 4 messages
YI links the customer’s billing dispute with separate Accounting and Credit Control confirmations that close the case.
- Accounting: CN-1190 reverses only the €430 duplicate.
- Credit Control: Duplicate reminders stopped; billing dispute closed.
- Customer
- Ridgeway Stores
- Opened
- 10 Jun 2026
- Issue
- Duplicate invoice (INV-90233 issued twice) — billing query.
- Documents
- INV-90233 · INV-90234
- Reconciliation
- INV-90233 reversed; INV-90234 remains valid
- Duplicate reminders
- Stopped for INV-90233
- Credit-note amount
- €430
- credit_note = duplicated_invoice_amount
- INV-90233 amount = €430
auto: Computed on duplicate detection · 10 Jun 16:05
- Credit note
- Auto-issued
- POST /erp/credit-notes
- map: invoice → credit note
done: Issued CN-1190 · 10 Jun 16:10
- Customer confirmation
- Closing email sent
- on case resolved
- channel: reply to customer thread
done: Email sent to accounts@ridgewaystores.com · 10 Jun 16:11
- Accounting posting
- Synced to the ERP
- POST /erp/postings
- map: credit note → ledger
done: Synced · 10 Jun 16:11
All source emails in this illustrative case
Duplicate invoice INV-90233
From accounts@ridgewaystores.com to support@acme.com · 10 Jun · 15:30
Hi, we've got two identical invoices for the same order: INV-90233 and INV-90234, both €430. One is a duplicate — can you cancel it? Thanks, Sarah Ridgeway — Ridgeway Stores
Credit note issued — CN-1190
From support@acme.com to accounts@ridgewaystores.com · 10 Jun · 16:11
Confirmed: the duplicate invoice INV-90233 has been reversed with credit note CN-1190 for €430. The case is closed. Support — Acme
Duplicate invoice reconciliation — Ridgeway Stores
From accounting@acme.com to support@acme.com · 10 Jun · 16:11
Hello,
Credit note CN-1190 for €430 reverses duplicate invoice INV-90233. INV-90234 remains valid. The reconciliation is recorded in the ERP; no further adjustment is needed for the duplicate.
Accounting
INV-90233 dispute closure — Ridgeway Stores
From creditcontrol@acme.com to support@acme.com · 10 Jun · 16:11
Hello,
After confirmation of CN-1190, we removed INV-90233 from payment reminders. The duplicate dispute is closed. Any balance on valid invoice INV-90234 follows the normal accounting process.
Credit Control
Sales — sales@acme.com
Q-3052 — Ferris Print Co.
Status: Awaiting sign-off
Illustrative category in the email list: Emma Clark
5 email entries · 10 messages
YI connects the customer’s proposal with separate conversations involving Delivery and Finance.
- Delivery: Two onboarding sessions; dates agreed after signing.
- Finance: 23% margin; the 22% discount still awaits approval.
- Client
- Ferris Print Co.
- Sent
- 8 Jun 2026
- Scope
- 120× Pro licenses + onboarding package
- Line items
- LIC-PRO-120 · ONB-STD · SUP-12M
- Net total
- €18,400
- Onboarding plan
- 2 × 60-minute sessions; dates agreed after signing
- Proposal cost
- €14,168 · current margin 23%
- Margin
- 23% (computed)
- margin = (net_total − cost) / net_total
- cost from price list v12 = €14,168
- (18,400 − 14,168) / 18,400 = 23%
auto: Recomputed on quote update · 8 Jun 11:40
- Validity
- 4 days left
- expires = sent_at + 14 days
- days_left = expires − today
auto: Recomputed daily · 9 Jun 06:00
- Follow-up
- Reminder auto-sent on day 5
- if no client reply for 5 days
- channel: reminder email to client
pending: Scheduled for 13 Jun 09:00 → mark.ferris@ferrisprint.com
- Discount approval
- Discount >20% needs sales lead OK
- if discount > 20% (here 22%)
- approver: sales lead
pending: Approval requested from sales.lead@acme.com · awaiting
- CRM sync
- Pushed to pipeline API
- PUT /crm/deals/{id}
- stage → "Proposal sent"
done: Synced to deal #DL-5567 · 8 Jun 11:41
All source emails in this illustrative case
Quote request — Pro licenses
From mark.ferris@ferrisprint.com to sales@acme.com · 5 Jun · 09:12
Hi,
we're looking to roll out your platform across the studio — around 120 Pro seats, plus the onboarding package for the team.
Could you put together a quote? We'd want to get started this quarter.
Thanks,
Mark Ferris — Ferris Print Co.
Re: Quote request — Pro licenses
From sales@acme.com to mark.ferris@ferrisprint.com · 8 Jun · 11:40
Hi Mark,
please find the quote, sent today:
• 120× Pro licenses (LIC-PRO-120)
• Onboarding package (ONB-STD)
• 12 months support (SUP-12M)
Net total €18,400. The quote is valid for 14 days from today.
Best,
Sales — Acme
Re: Volume discount
From mark.ferris@ferrisprint.com to sales@acme.com · 8 Jun · 15:02
Good morning,
thank you for the proposal — it looks aligned with what we need.
Could you review the volume discount for the 120 licenses? We were hoping for around 22% given the size. We'd like to close by the end of the week and present it to the board on Monday.
Thanks,
Mark Ferris — Ferris Print Co.
Rollout plan — 120 seats for Ferris Print Co.
From delivery@acme.com to sales@acme.com · 8 Jun · 14:10
Hi Emma,
for Ferris Print Co.’s 120 Pro seats, we can organize onboarding as two 60-minute sessions included in the ONB-STD package.
Dates will be agreed after signing. No sessions are reserved yet: we need commercial confirmation before committing the team.
Delivery — Acme
Commercial review — Ferris proposal and volume discount
From finance@acme.com to sales@acme.com · 8 Jun · 15:20
Hi Emma,
the cost of the current Ferris Print Co. proposal is €14,168 under price list v12. Against the quoted net total of €18,400, the margin is 23%.
The customer’s request for a 22% discount is still pending: it exceeds the 20% threshold and requires sales-lead approval. Do not revise the price or treat the request as accepted before the decision.
Finance — Acme
Q-3047 — Bradbury Workshops
Status: Awaiting sign-off
Illustrative category in the email list: Liam Morgan
4 email entries · 4 messages
YI connects the customer proposal with Maintenance planning and a separate Finance cost review.
- Maintenance: Two visits proposed over the year; dates after signing.
- Finance: €4,278 cost on €6,200 revenue gives a 31% margin.
- Client
- Bradbury Workshops
- Sent
- 7 Jun 2026
- Scope
- Yearly maintenance renewal
- Line items
- MNT-12M · SUP-STD
- Net total
- €6,200
- Maintenance plan
- 2 visits in 12 months; schedule to be agreed
- Renewal cost
- €4,278 · 31% margin
- Margin
- 31%
- margin = (net_total − cost) / net_total
- cost from price list v12 = €4,278
- (6,200 − 4,278) / 6,200 = 31%
auto: Recomputed on quote send · 7 Jun 10:30
- Validity
- 10 days left
- expires = sent_at + 14 days = 21 Jun
- days_left = expires − today
auto: Recomputed daily · 11 Jun 06:00
- Follow-up
- Day-5 reminder auto-scheduled
- if no client reply for 5 days
- channel: reminder email to client
pending: Scheduled for 12 Jun 09:00 → ops@bradburyworkshops.com
- CRM sync
- Pushed to the pipeline
- PUT /crm/deals/{id}
- stage → "Proposal sent"
done: Synced to deal #DL-5571 · 7 Jun 10:31
All source emails in this illustrative case
Maintenance renewal
From ops@bradburyworkshops.com to sales@acme.com · 6 Jun · 15:20
Hi, we need to renew the yearly maintenance for our equipment. Could you send a quote? Bradbury Workshops
Re: Maintenance renewal — quote
From sales@acme.com to ops@bradburyworkshops.com · 7 Jun · 10:30
Quote attached (sent today): 12-month maintenance (MNT-12M) + standard support (SUP-STD). Net total €6,200. Valid 14 days. Sales — Acme
Annual renewal service plan — Bradbury Workshops
From maintenance@acme.com to sales@acme.com · 7 Jun · 10:30
Hello,
For the MNT-12M renewal, we propose two preventive visits over 12 months alongside the included SUP-STD support. Dates will be agreed after signing. No technicians are committed to Bradbury Workshops yet.
Maintenance
Renewal cost review — Bradbury Workshops
From finance@acme.com to sales@acme.com · 7 Jun · 10:30
Hello,
The expected renewal cost is €4,278. Against the €6,200 net total, the margin is 31%, as recorded in the proposal. The contract still awaits the customer’s signature; this review is not acceptance.
Finance
Q-3039 — Cardinal Hotel
Status: Awaiting purchase order
Illustrative category in the email list: Emma Clark
4 email entries · 4 messages
YI also gathers Warehouse availability and Installation planning discussed outside the sales thread.
- Warehouse: 12 X200 units available; allocation awaits the order.
- Installation: Two half-days proposed; room access to be agreed.
- Client
- Cardinal Hotel
- Sent
- 6 Jun 2026
- Scope
- 12× X200 replacement units + installation
- Line items
- UNIT-X200 ×12 · INSTALL-STD
- Net total
- €9,840
- Unit availability
- 12 X200 available, not yet allocated
- Installation plan
- 2 half-days; dates and access to be agreed
- Discount applied
- 8%
- volume discount from price list
- condition: units ≥ 10 → 8%
auto: Computed on quote build · 6 Jun 14:00
- Validity
- 9 days left
- expires = sent_at + 14 days = 20 Jun
- days_left = expires − today
auto: Recomputed daily · 11 Jun 06:00
- Awaiting
- Customer purchase order
- if quote sent and no PO received
- ask: customer for purchase order
pending: Reminder scheduled 11 Jun 09:00 → procurement@cardinalhotel.com
- CRM sync
- Stage → "Proposal sent"
- PUT /crm/deals/{id}
- stage → "Proposal sent"
done: Synced to deal #DL-5560 · 6 Jun 14:01
All source emails in this illustrative case
Replace 12 units
From procurement@cardinalhotel.com to sales@acme.com · 5 Jun · 11:40
Hi, we need to replace 12 X200 units in our rooms, with installation by your team. Could you put a quote together? Cardinal Hotel
Re: Replace 12 units — quote
From sales@acme.com to procurement@cardinalhotel.com · 6 Jun · 14:00
Quote attached: 12× UNIT-X200 + INSTALL-STD, with an 8% volume discount. Net total €9,840. To proceed we need your purchase order. Sales — Acme
X200 stock availability — Cardinal Hotel
From warehouse@acme.com to sales@acme.com · 6 Jun · 14:00
Hello,
Twelve X200 units are available for the Cardinal Hotel replacement. They have not been allocated to the job yet: the purchase order is needed before picking and dispatch can be confirmed.
Warehouse
Room replacement planning — Cardinal Hotel
From installation@acme.com to sales@acme.com · 6 Jun · 14:00
Hello,
We propose splitting the 12 X200 installations over two half-days to limit disruption to occupied rooms. We need the purchase order and agreed room-access windows before scheduling dates and technicians.
Installation
Q-3031 — Norton & Partners
Status: Awaiting sign-off
Illustrative category in the email list: Sarah Reed
5 email entries · 5 messages
YI connects sales follow-ups with Consulting resource planning and the Finance review.
- Consulting: Two consultants identified; start awaits signing.
- Finance: €7,200 expected cost; 40% proposal margin.
- Client
- Norton & Partners
- Sent
- 5 Jun 2026
- Scope
- Consulting retainer (quarterly)
- Line items
- CONS-Q · SUP-STD
- Net total
- €12,000
- Start plan
- 2 consultants planned; no dates committed
- Retainer cost
- €7,200 · 40% margin
- Margin
- 40%
- margin = (net_total − cost) / net_total
- cost = €7,200
- (12,000 − 7,200) / 12,000 = 40%
auto: Recomputed on quote send · 5 Jun 09:30
- Validity
- 8 days left
- expires = sent_at + 14 days = 19 Jun
- days_left = expires − today
auto: Recomputed daily · 11 Jun 06:00
- Follow-up
- 2nd reminder sent
- if no client reply for 5 days
- channel: reminder email to client
done: Sent to office@nortonpartners.com · 9 Jun 09:00
- CRM sync
- Stage → "Proposal sent"
- PUT /crm/deals/{id}
- stage → "Proposal sent"
done: Synced to deal #DL-5548 · 5 Jun 09:31
All source emails in this illustrative case
Consulting retainer request
From office@nortonpartners.com to sales@acme.com · 3 Jun · 16:10
Hi, we're interested in a quarterly consulting retainer. Could you send us a proposal? Norton & Partners
Re: Consulting retainer — proposal
From sales@acme.com to office@nortonpartners.com · 5 Jun · 09:30
Proposal attached: quarterly retainer (CONS-Q) + standard support (SUP-STD), net total €12,000. Valid 14 days. Sales — Acme
2nd reminder — Q-3031
From sales@acme.com to office@nortonpartners.com · 9 Jun · 09:00
Hi, a reminder about proposal Q-3031 (€12,000), valid until 19 June. We remain at your disposal. Sales — Acme
Quarterly retainer team availability — Norton & Partners
From consulting@acme.com to sales@acme.com · 9 Jun · 09:00
Hello,
We have identified two consultants with suitable skills for Norton & Partners’ CONS-Q retainer. Availability must be confirmed at signing. No days have been reserved and no start date is agreed yet.
Consulting
Retainer financial review — Norton & Partners
From finance@acme.com to sales@acme.com · 9 Jun · 09:00
Hello,
The planned retainer and support cost is €7,200. Against the €12,000 net proposal, the margin is 40%. The second sales reminder does not change the status: the customer’s signature is still missing.
Finance
Q-3025 — Aurora Coffee
Status: Awaiting sign-off
Illustrative category in the email list: Liam Morgan
4 email entries · 4 messages
YI combines the volume request, Production feasibility and a separate Finance discussion about the discount.
- Production: 200 dispensers in one batch; preparation after confirmation.
- Finance: 15% discount means 19% margin; approval still pending.
- Client
- Aurora Coffee
- Sent
- 5 Jun 2026
- Scope
- Bulk order — 200× pod dispensers
- Line items
- DISP-200 · SUP-6M
- Net total
- €7,400
- Batch preparation
- 200 units · 10 working days after confirmation
- Commercial decision
- 15% discount awaiting approval
- Requested discount
- 15%
- if customer requested discount
- ask: review by sales
pending: Customer request under review
- Margin with discount
- 19%
- margin = (net_total − cost) / net_total
- cost = €5,994
- (7,400 − 5,994) / 7,400 = 19%
auto: Recomputed with requested discount · 5 Jun 11:00
- Discount approval
- Discount >10% needs sales-lead OK
- if discount > 10% (here 15%)
- approver: sales lead
pending: Approval requested · awaiting
- Validity
- 8 days left
- expires = sent_at + 14 days = 19 Jun
- days_left = expires − today
auto: Recomputed daily · 11 Jun 06:00
- CRM sync
- Stage → "Proposal sent"
- PUT /crm/deals/{id}
- stage → "Proposal sent"
done: Synced to deal #DL-5542 · 5 Jun 11:01
All source emails in this illustrative case
Bulk order + discount
From buying@auroracoffee.com to sales@acme.com · 4 Jun · 10:15
Hi, we'd like to order 200 pod dispensers. Given the volume, could we get a 15% discount? Aurora Coffee
Re: Bulk order — quote
From sales@acme.com to buying@auroracoffee.com · 5 Jun · 11:00
Quote attached: 200× DISP-200 + 6 months support (SUP-6M), net total €7,400. The requested 15% discount is pending sales-lead approval. Sales — Acme
Capacity for 200 dispensers — Aurora Coffee
From production@acme.com to sales@acme.com · 5 Jun · 11:00
Hello,
We can prepare the 200 DISP-200 dispensers in a single batch. The estimate is 10 working days from final order confirmation. Production has not started; signature and commercial terms still need to be settled.
Production
Volume discount assessment — Aurora Coffee
From finance@acme.com to sales@acme.com · 5 Jun · 11:00
Hello,
At the requested 15% discount, the estimated margin falls to 19%. The request exceeds the 10% threshold and needs sales-lead approval. No decision has arrived yet, so the discount must not be presented as granted.
Finance
Suppliers — orders@acme.com
PO-5210 — Marrow Freight
Status: Awaiting approval
Illustrative category in the email list: Liam Morgan
5 email entries · 8 messages
YI combines the carrier’s quote with information shared separately by Production and Logistics.
- Production: Two pallets ready Wednesday from 08:00.
- Logistics: €400 budget; the €480 quote needs approval.
- Supplier
- Marrow Freight
- Service
- Pallet shipment
- Route
- Milan → Naples
- Weight
- 1,200 kg
- Cost
- €480
- Doc references
- DOC-48120934 · DOC-48122071
- Goods ready
- 2 pallets · 1,200 kg · Wednesday from 08:00
- Collection slot
- Wednesday morning on hold; awaiting Logistics approval
- Budget variance
- +€80 over plan
- variance = cost − lane_budget
- lane_budget(Milan→Naples) = €400
- €480 − €400 = +€80
auto: Recomputed on quote receipt · 8 Jun 09:36
- Route approval
- Routes >€400 need logistics OK
- if cost > €400 (here €480)
- approver: logistics manager
pending: Approval requested from logistics@acme.com · awaiting
- Booking notice
- Confirmation sent to supplier
- on status → "Booked"
- channel: email to supplier
pending: Sends to ops@marrowfreight.com once approved
- ERP posting
- Synced to orders API
- POST /erp/orders
- map: PO fields → order
done: Synced to order #ERP-5210 · 8 Jun 09:37
All source emails in this illustrative case
Pallet shipment quote Milan–Naples
From ops@marrowfreight.com to orders@acme.com · 8 Jun · 09:35
Hello,
please find our quote for the pallet shipment Milan → Naples.
• 1,200 kg, 2 pallets
• Transit time 48h
• Total €480 (fuel surcharge included)
Capacity is limited during the holiday week. Let us know if we should hold the Wednesday slot.
Marrow Freight
Re: Pallet shipment quote
From orders@acme.com to ops@marrowfreight.com · 8 Jun · 10:10
Hi,
thank you for the €480 quote. We are checking the cost with Logistics; the booking still awaits internal approval.
Please send the consignment document references and hold the slot without confirming collection yet.
Acme Orders
Wednesday slot on hold — consignment documents
From ops@marrowfreight.com to orders@acme.com · 8 Jun · 11:15
Hello,
we are holding the Wednesday morning slot for the Milan → Naples shipment: 2 pallets, 1,200 kg.
Consignment documents: DOC-48120934 and DOC-48122071. Collection is not confirmed yet; we need your go-ahead before assigning a driver.
Marrow Freight
Packing completion — Naples shipment
From production@acme.com to orders@acme.com · 8 Jun · 09:45
Hi Liam,
the two pallets for Naples will be ready for collection on Wednesday from 08:00 at the Milan warehouse. Confirmed total weight is 1,200 kg.
We have prepared documents DOC-48120934 and DOC-48122071. Packing can be completed before the truck arrives; we are waiting for the carrier’s confirmation.
Production — Acme
Milan–Naples lane budget — Marrow cost review
From logistics@acme.com to orders@acme.com · 8 Jun · 10:00
Hi Liam,
the planned Milan → Naples lane budget is €400. Marrow’s €480 quote exceeds it by €80.
Logistics-manager approval has been requested and is still pending. The slot can stay on hold, but do not confirm collection or the booking with the supplier before approval.
Logistics — Acme
PO-5207 — Lynx Logistics
Status: Awaiting ETA
Illustrative category in the email list: Tom Reyes
4 email entries · 4 messages
YI connects the carrier’s quote with Warehouse readiness and the destination’s receiving requirements.
- Warehouse: 850 kg pallet ready; documents prepared.
- Receiver: Confirmed arrival time needed to arrange unloading.
- Supplier
- Lynx Logistics
- Service
- Mixed pallet
- Route
- Turin → Rome
- Weight
- 850 kg
- Cost
- €360
- Doc references
- DDT-47990123
- Load readiness
- 850 kg ready · DDT-47990123
- Receiving constraint
- Unloading team to be planned once ETA is confirmed
- Budget variance
- −€20 (within budget)
- variance = cost − lane_budget
- lane_budget(Turin→Rome) = €380
- €360 − €380 = −€20
auto: Recomputed on quote receipt · 7 Jun 08:52
- Confirmed ETA
- Awaiting from the supplier
- if quote received and no ETA on file
- ask: supplier for ETA
pending: Request sent 7 Jun 09:30 → ops@lynxlogistics.com
- Booking notice
- Will be sent on approval
- on status → "Booked"
- channel: email to supplier
pending: Awaiting confirmed ETA
- ERP posting
- Synced to the orders API
- POST /erp/orders
- map: PO fields → order
done: Synced to order #ERP-5207 · 7 Jun 08:52
All source emails in this illustrative case
Mixed pallet quote Turin–Rome
From ops@lynxlogistics.com to orders@acme.com · 7 Jun · 08:50
Hi, attached is our quote for the Turin → Rome mixed pallet: 850 kg, total €360. The exact ETA will be confirmed shortly. Reference DDT-47990123. Lynx Logistics
Re: Mixed pallet quote — ETA
From orders@acme.com to ops@lynxlogistics.com · 7 Jun · 09:30
Thanks, the €360 cost is within the lane budget (€380). Could you confirm the ETA so we can proceed with the booking? Acme Orders
Turin–Rome pallet preparation — Lynx Logistics
From warehouse@acme.com to orders@acme.com · 7 Jun · 09:30
Hello,
The 850 kg mixed pallet is ready at the Turin warehouse and DDT-47990123 has been prepared. The goods can leave, but we are waiting for the transport plan to be confirmed before scheduling collection.
Warehouse
Rome unloading arrangements — Lynx Logistics
From receiving@destination.example to orders@acme.com · 7 Jun · 09:30
Hello,
We need to arrange an unloading team and assign a bay in Rome. Please send the confirmed ETA before booking the appointment. No arrival time has been received and no receiving window is reserved yet.
Receiver
PO-5201 — BlueCargo
Status: Customs hold
Illustrative category in the email list: Sarah Reed
4 email entries · 4 messages
YI combines the carrier’s report with customs-document details and a separate Logistics budget review.
- Customs broker: Certificate of origin missing; release not authorized.
- Logistics: €1,150 against €1,060 budget; approval pending.
- Supplier
- BlueCargo
- Service
- 20' container
- Route
- Genoa → Palermo
- Weight
- 4,200 kg
- Cost
- €1,150
- Doc references
- DDT-47880441 · DDT-47880442
- Status
- Customs hold
- Missing document
- Certificate of origin requested, not yet received
- Budget check
- €90 over budget; Logistics approval still pending
- Customs documents
- Requested from the supplier
- if customs hold and docs missing
- ask: supplier for customs documents
pending: Requested since 6 Jun 11:20 → ops@bluecargo.com
- Budget variance
- +€90 over plan
- variance = cost − lane_budget
- lane_budget(Genoa→Palermo) = €1,060
- €1,150 − €1,060 = +€90
auto: Recomputed on quote receipt · 6 Jun 09:15
- Approval
- Costs >€1,000 need logistics OK
- if cost > €1,000 (here €1,150)
- approver: logistics manager
pending: Approval requested from logistics@acme.com · awaiting
- ERP posting
- Synced to the orders API
- POST /erp/orders
- map: PO fields → order
done: Synced to order #ERP-5201 · 6 Jun 09:15
All source emails in this illustrative case
Container Genoa–Palermo on customs hold
From ops@bluecargo.com to orders@acme.com · 6 Jun · 11:05
Hi, the Genoa → Palermo container (4,200 kg, €1,150, DDT-47880441 and DDT-47880442) is on customs hold — some customs documents are missing. BlueCargo
Re: Container hold — documents
From orders@acme.com to ops@bluecargo.com · 6 Jun · 11:20
Thanks for flagging. Please send the list of missing customs documents. The cost (€1,150) exceeds the lane budget (€1,060), so it's pending logistics approval. Acme Orders
Genoa–Palermo customs clearance documents — BlueCargo
From documents@customs-service.example to orders@acme.com · 6 Jun · 11:20
Hello,
The certificate of origin is missing for the container associated with DDT-47880441 and DDT-47880442. It has been requested from the supplier but has not arrived. The container remains on customs hold and release cannot be confirmed.
Customs broker
Container cost authorization — BlueCargo
From logistics@acme.com to orders@acme.com · 6 Jun · 11:20
Hello,
The container costs €1,150 against a €1,060 budget, a €90 variance. Logistics approval is required and still pending. Cost authorization and customs release are separate conditions, both still outstanding.
Logistics
Read the user manual · Outlook add-in guide · Guida Outlook in italiano
Microsoft and Outlook are trademarks of the Microsoft group of companies.
3 simple steps
- Connect your inbox. Connect the inbox you want to monitor. YI analyzes incoming emails, maps information, roles and processes, then organizes them into tidy reports. Fully autonomous — no disruption to you or your team. No inbox yet? Create one here.
- You're already done! Nothing else to do: we'll notify you as soon as structure and reports are ready, so you can start chatting to find and understand your team's work. In a hurry? Just tell us how to interpret the information and we'll start right away.
- Want more? Information is already organized into up-to-date reports — why not speed up your team's work? YI can request validations and approvals, send notifications, and push structured data straight to other systems.
A live look at what YI extracts
The interactive hero presents a scripted conversation, not a live AI session. Selecting a mailbox changes the example question and answer; opening a case shows its structured fields, calculations and automation details; opening its sources shows the supporting emails. The examples below make all those states readable without clicking or running JavaScript.
A natural-language answer can draw on several cases. Each case, in turn, can combine multiple related email threads about one business matter. New information can update that existing record. Customer names, dates, values and outcomes here are fictional; pending actions remain pending and do not represent live approvals or integrations.
Below is a worked example across three common mailboxes: Customer Support, Sales, and Suppliers. For each, YI reads the incoming emails, builds structured report cards (with calculations and automations), and answers natural-language questions about them.
Customer Support mailbox — support@acme.com
Ask YI: Which support cases need us this morning?
5 cases were opened or updated this morning. The most urgent is a warranty claim from Brightwood Interiors — a faulty unit reported twice, now past the first-response SLA. Ops sign-off for the warranty swap is already requested and the proof of purchase is on file.
5 open cases · today
- CASE-0412 — Brightwood Interiors (11 Jun, v4): Control unit faults intermittently; second report this month — warranty replacement requested.
- CASE-0408 — Maple & Co (11 Jun, v4): Setup question on model X200 — awaiting our reply.
- CASE-0405 — Garrison Supplies (10 Jun, v3): Wrong item shipped; return opened and refund pending approval.
- CASE-0401 — Hartley Group (10 Jun, v3): Intermittent error after firmware update; diagnostic logs requested.
- CASE-0396 — Ridgeway Stores (10 Jun, v4): Billing query on a duplicate invoice — resolved, credit issued.
Reports in detail
CASE-0412 — Brightwood Interiors [Replacement due]
Support · revision 4 · updated 11 Jun
- Customer
- Brightwood Interiors
- Opened
- 11 Jun 2026
- Issue
- Control unit fails intermittently; second report this month. Customer requests a warranty replacement, not another repair.
- Severity
- High
- Order & serial
- ORD-48120 · SN-220719 · X200-EU
- First-response SLA
- 2h overdue
Formula:- sla_due = opened_at + target(severity)
- severity = "High" → 4h target
- now − sla_due = +2h 10m
Run: Recomputed when the case was reopened · 11 Jun 10:20 (auto)
- Customer update
- Auto-sent on status change
Trigger:- on status → "Replacement due"
- channel: reply to customer thread
Run: Email sent to hannah.brooks@brightwoodinteriors.com · 11 Jun 10:25 (done)
- Proof of purchase
- Invoice 48120 received
Trigger:- if warranty_claim and no receipt on file
- ask: customer for proof of purchase
Run: Invoice received from the customer · 11 Jun 10:24 (done)
- Replacement approval
- Warranty swap needs ops sign-off
Trigger:- if action = "warranty replacement"
- approver: operations manager
Run: Approval requested from ops@acme.com · awaiting (pending)
- Helpdesk sync
- Posted to helpdesk API
Trigger:- POST /helpdesk/tickets
- map: report fields → ticket
Run: Synced to ticket #HD-22841 · 11 Jun 10:26 (done)
Source emails
- Re: faulty control unit — again — from hannah.brooks@brightwoodinteriors.com to support@acme.com (11 Jun · 10:19): Hi,
this is the second time the control unit has failed on us this month — the same intermittent fault as before. We followed the reset steps in your last email, but it keeps cutting out.
The unit is still under warranty (purchased in March, model X200-EU). C…
- Re: serial SN-220719 check — from tom.reyes@acme.com to support@acme.com (11 Jun · 10:21): Confirmed the serial SN-220719 against our records — unit X200-EU, shipped March, warranty active until next March. Eligible for replacement.
Tom…
- Fwd: warranty claim #X200 — from tom.reyes@acme.com to ops@acme.com (11 Jun · 10:23): Team,
escalating this — Brightwood Interiors' control unit (order ORD-48120) is down again, second failure this month. Their showroom display is offline, so I've flagged it High.
The customer wants a straight warranty replacement, not another repair. Can ops …
- Proof of purchase — invoice 48120 — from hannah.brooks@brightwoodinteriors.com to support@acme.com (11 Jun · 10:24): Hi,
as requested, attaching the invoice (no. 48120) as proof of purchase for the control unit. The case was opened this morning. Let me know if you need anything else to process the warranty.
Hannah Brooks — Brightwood Interiors…
CASE-0408 — Maple & Co [Awaiting reply]
Support · revision 4 · updated 11 Jun
- Customer
- Maple & Co
- Opened
- 11 Jun 2026
- Issue
- Setup question on model X200 — the initial pairing step doesn't complete; the unit isn't detected.
- Severity
- Normal
- Order & serial
- ORD-47980 · SN-219004 · X200-EU
- First-response SLA
- 6h left
Formula:- sla_due = opened_at + target(severity)
- severity = "Normal" → 8h target
- due = 09:05 + 8h = 17:05
Run: Recomputed on case open · 11 Jun 09:05 (auto)
- Acknowledgement
- Auto-sent to the customer
Trigger:- on case open
- channel: reply to customer thread
Run: Email sent to r.maple@mapleco.com · 11 Jun 09:06 (done)
- Suggested KB
- KB-X200-SETUP matched and sent
Trigger:- match issue text → KB article
- attach: KB-X200-SETUP
Run: Article sent with the acknowledgement · 11 Jun 09:06 (done)
- Draft reply
- Prepared, awaiting review
Trigger:- draft reply from KB-X200-SETUP
- ask: agent to review and send
Run: Awaiting agent review (pending)
Source emails
- X200 setup problem — from r.maple@mapleco.com to support@acme.com (11 Jun · 09:04): Hi, we've received the X200 (order ORD-47980, serial SN-219004) but can't complete the initial pairing — the unit isn't detected at the pairing step. Can you help? Thanks, Rachel Maple — Maple & Co…
- Acknowledgement — CASE-0408 — from support@acme.com to r.maple@mapleco.com (11 Jun · 09:06): Hi Rachel, we've logged your request (CASE-0408) and will reply today. In the meantime here's the KB-X200-SETUP guide, which covers the pairing step. Support — Acme…
CASE-0405 — Garrison Supplies [Return in progress]
Support · revision 3 · updated 10 Jun
- Customer
- Garrison Supplies
- Opened
- 10 Jun 2026
- Issue
- Wrong item shipped (X150 delivered instead of the ordered X200); customer requests a return and refund.
- Severity
- Normal
- Order & serial
- ORD-47860 · SN-218742 · X150-EU
- Refund amount
- €1,240
Formula:- refund = item_price
- item_price from price list v12 = €1,240
Run: Computed from price list · 10 Jun 15:10 (auto)
- Return label
- Generated and sent to the customer
Trigger:- on return opened
- channel: email to customer
Run: Label sent to p.garrison@garrisonsupplies.com · 10 Jun 15:20 (done)
- Refund approval
- Refunds >€1,000 need finance sign-off
Trigger:- if refund > €1,000 (here €1,240)
- approver: finance
Run: Approval requested from finance@acme.com · awaiting (pending)
- ERP posting
- Return opened via the orders API
Trigger:- POST /erp/returns
- map: case fields → RMA
Run: Synced to RMA-3320 · 10 Jun 15:21 (done)
Source emails
- Wrong item on order ORD-47860 — from p.garrison@garrisonsupplies.com to support@acme.com (10 Jun · 14:58): Hi, on order ORD-47860 we received an X150 (serial SN-218742) instead of the X200 we ordered. We'd like to return it and get a refund. Thanks, Paul Garrison — Garrison Supplies…
- Price check — X200 (price list v12) — from support@acme.com to support@acme.com (10 Jun · 15:10): Confirmed the item's list price: €1,240 (price list v12). Refund amount matches.…
- Return label — RMA-3320 — from support@acme.com to p.garrison@garrisonsupplies.com (10 Jun · 15:20): Attached is the return label (RMA-3320). Once the item is received we'll process the €1,240 refund, pending finance approval. Support — Acme…
CASE-0401 — Hartley Group [Diagnosing]
Support · revision 3 · updated 10 Jun
- Customer
- Hartley Group
- Opened
- 10 Jun 2026
- Issue
- Intermittent error after firmware update 2.4.1; the unit reboots on its own.
- Severity
- High
- Order & serial
- ORD-47710 · SN-217650 · X300-EU
- Firmware version
- 2.4.1 (extracted from the email body)
- First-response SLA
- 30m left
Formula:- sla_due = opened_at + target(severity)
- severity = "High" → 4h target
- due = 10:40 + 4h = 14:40
Run: Recomputed on case open · 10 Jun 10:40 (auto)
- Diagnostic logs request
- Sent to the customer
Trigger:- if reboot issue and no logs on file
- ask: customer for diagnostic export
Run: Requested since 10 Jun 11:00 (pending)
- Engineering escalation
- Technical ticket opened
Trigger:- POST /eng/tickets
- severity → High
Run: Synced to ticket ENG-882 · 10 Jun 11:05 (done)
- Customer update
- Status update sent
Trigger:- on status change
- channel: reply to customer thread
Run: Update sent to it@hartleygroup.com · 10 Jun 11:00 (done)
Source emails
- Reboots after firmware update — from it@hartleygroup.com to support@acme.com (10 Jun · 10:40): Hi, after firmware update 2.4.1 the unit (order ORD-47710, serial SN-217650, model X300-EU) keeps rebooting on its own. This is urgent for our production line. Mark Hartley — Hartley Group…
- Diagnostic logs request — CASE-0401 — from support@acme.com to it@hartleygroup.com (10 Jun · 11:00): To investigate the reboots we need the unit's diagnostic logs (Settings → Diagnostics → Export). We've also opened a technical review. Support — Acme…
- Engineering escalation — ENG-882 — from support@acme.com to eng@acme.com (10 Jun · 11:05): Opening technical ticket ENG-882: X300-EU rebooting intermittently after firmware 2.4.1, High severity.…
CASE-0396 — Ridgeway Stores [Resolved]
Support · revision 4 · updated 10 Jun
- Customer
- Ridgeway Stores
- Opened
- 10 Jun 2026
- Issue
- Duplicate invoice (INV-90233 issued twice) — billing query.
- Documents
- INV-90233 · INV-90234
- Credit-note amount
- €430
Formula:- credit_note = duplicated_invoice_amount
- INV-90233 amount = €430
Run: Computed on duplicate detection · 10 Jun 16:05 (auto)
- Credit note
- Auto-issued
Trigger:- POST /erp/credit-notes
- map: invoice → credit note
Run: Issued CN-1190 · 10 Jun 16:10 (done)
- Customer confirmation
- Closing email sent
Trigger:- on case resolved
- channel: reply to customer thread
Run: Email sent to accounts@ridgewaystores.com · 10 Jun 16:11 (done)
- Accounting posting
- Synced to the ERP
Trigger:- POST /erp/postings
- map: credit note → ledger
Run: Synced · 10 Jun 16:11 (done)
Source emails
- Duplicate invoice INV-90233 — from accounts@ridgewaystores.com to support@acme.com (10 Jun · 15:30): Hi, we've got two identical invoices for the same order: INV-90233 and INV-90234, both €430. One is a duplicate — can you cancel it? Thanks, Sarah Ridgeway — Ridgeway Stores…
- Credit note issued — CN-1190 — from support@acme.com to accounts@ridgewaystores.com (10 Jun · 16:11): Confirmed: the duplicate invoice INV-90233 has been reversed with credit note CN-1190 for €430. The case is closed. Support — Acme…
Sales mailbox — sales@acme.com
Ask YI: Which quotes are still waiting on the client?
5 quotes are awaiting client confirmation. The largest is Q-3052 for Ferris Print Co. — €18,400, valid 4 more days. On Q-3052 (Ferris Print), the day-5 reminder is already scheduled for 13 Jun at 09:00.
5 quotes · awaiting client
- Q-3052 — Ferris Print Co. (8 Jun, v2): 120× Pro licenses + onboarding, €18,400 — sent, awaiting sign-off.
- Q-3047 — Bradbury Workshops (7 Jun, v1): Yearly maintenance renewal, €6,200.
- Q-3039 — Cardinal Hotel (6 Jun, v3): Replacement units ×12, awaiting purchase order.
- Q-3031 — Norton & Partners (5 Jun, v2): Consulting retainer — follow-up #2 sent.
- Q-3025 — Aurora Coffee (5 Jun, v1): Bulk order, volume discount requested.
Reports in detail
Q-3052 — Ferris Print Co. [Awaiting sign-off]
Sales · revision 2 · updated 8 Jun
- Client
- Ferris Print Co.
- Sent
- 8 Jun 2026
- Scope
- 120× Pro licenses + onboarding package
- Line items
- LIC-PRO-120 · ONB-STD · SUP-12M
- Net total
- €18,400
- Margin
- 23% (computed)
Formula:- margin = (net_total − cost) / net_total
- cost from price list v12 = €14,168
- (18,400 − 14,168) / 18,400 = 23%
Run: Recomputed on quote update · 8 Jun 11:40 (auto)
- Validity
- 4 days left
Formula:- expires = sent_at + 14 days
- days_left = expires − today
Run: Recomputed daily · 9 Jun 06:00 (auto)
- Follow-up
- Reminder auto-sent on day 5
Trigger:- if no client reply for 5 days
- channel: reminder email to client
Run: Scheduled for 13 Jun 09:00 → mark.ferris@ferrisprint.com (pending)
- Discount approval
- Discount >20% needs sales lead OK
Trigger:- if discount > 20% (here 22%)
- approver: sales lead
Run: Approval requested from sales.lead@acme.com · awaiting (pending)
- CRM sync
- Pushed to pipeline API
Trigger:- PUT /crm/deals/{id}
- stage → "Proposal sent"
Run: Synced to deal #DL-5567 · 8 Jun 11:41 (done)
Source emails
- Quote request — Pro licenses — from mark.ferris@ferrisprint.com to sales@acme.com (5 Jun · 09:12): Hi,
we're looking to roll out your platform across the studio — around 120 Pro seats, plus the onboarding package for the team.
Could you put together a quote? We'd want to get started this quarter.
Thanks,
Mark Ferris — Ferris Print Co.…
- Re: Quote request — Pro licenses — from sales@acme.com to mark.ferris@ferrisprint.com (8 Jun · 11:40): Hi Mark,
please find the quote, sent today:
• 120× Pro licenses (LIC-PRO-120)
• Onboarding package (ONB-STD)
• 12 months support (SUP-12M)
Net total €18,400. The quote is valid for 14 days from today.
Best,
Sales — Acme…
- Re: Volume discount — from mark.ferris@ferrisprint.com to sales@acme.com (8 Jun · 15:02): Good morning,
thank you for the proposal — it looks aligned with what we need.
Could you review the volume discount for the 120 licenses? We were hoping for around 22% given the size. We'd like to close by the end of the week and present it to the board on Mo…
Q-3047 — Bradbury Workshops [Awaiting sign-off]
Sales · revision 1 · updated 7 Jun
- Client
- Bradbury Workshops
- Sent
- 7 Jun 2026
- Scope
- Yearly maintenance renewal
- Line items
- MNT-12M · SUP-STD
- Net total
- €6,200
- Margin
- 31%
Formula:- margin = (net_total − cost) / net_total
- cost from price list v12 = €4,278
- (6,200 − 4,278) / 6,200 = 31%
Run: Recomputed on quote send · 7 Jun 10:30 (auto)
- Validity
- 10 days left
Formula:- expires = sent_at + 14 days = 21 Jun
- days_left = expires − today
Run: Recomputed daily · 11 Jun 06:00 (auto)
- Follow-up
- Day-5 reminder auto-scheduled
Trigger:- if no client reply for 5 days
- channel: reminder email to client
Run: Scheduled for 12 Jun 09:00 → ops@bradburyworkshops.com (pending)
- CRM sync
- Pushed to the pipeline
Trigger:- PUT /crm/deals/{id}
- stage → "Proposal sent"
Run: Synced to deal #DL-5571 · 7 Jun 10:31 (done)
Source emails
- Maintenance renewal — from ops@bradburyworkshops.com to sales@acme.com (6 Jun · 15:20): Hi, we need to renew the yearly maintenance for our equipment. Could you send a quote? Bradbury Workshops…
- Re: Maintenance renewal — quote — from sales@acme.com to ops@bradburyworkshops.com (7 Jun · 10:30): Quote attached (sent today): 12-month maintenance (MNT-12M) + standard support (SUP-STD). Net total €6,200. Valid 14 days. Sales — Acme…
Q-3039 — Cardinal Hotel [Awaiting purchase order]
Sales · revision 3 · updated 6 Jun
- Client
- Cardinal Hotel
- Sent
- 6 Jun 2026
- Scope
- 12× X200 replacement units + installation
- Line items
- UNIT-X200 ×12 · INSTALL-STD
- Net total
- €9,840
- Discount applied
- 8%
Formula:- volume discount from price list
- condition: units ≥ 10 → 8%
Run: Computed on quote build · 6 Jun 14:00 (auto)
- Validity
- 9 days left
Formula:- expires = sent_at + 14 days = 20 Jun
- days_left = expires − today
Run: Recomputed daily · 11 Jun 06:00 (auto)
- Awaiting
- Customer purchase order
Trigger:- if quote sent and no PO received
- ask: customer for purchase order
Run: Reminder scheduled 11 Jun 09:00 → procurement@cardinalhotel.com (pending)
- CRM sync
- Stage → "Proposal sent"
Trigger:- PUT /crm/deals/{id}
- stage → "Proposal sent"
Run: Synced to deal #DL-5560 · 6 Jun 14:01 (done)
Source emails
- Replace 12 units — from procurement@cardinalhotel.com to sales@acme.com (5 Jun · 11:40): Hi, we need to replace 12 X200 units in our rooms, with installation by your team. Could you put a quote together? Cardinal Hotel…
- Re: Replace 12 units — quote — from sales@acme.com to procurement@cardinalhotel.com (6 Jun · 14:00): Quote attached: 12× UNIT-X200 + INSTALL-STD, with an 8% volume discount. Net total €9,840. To proceed we need your purchase order. Sales — Acme…
Q-3031 — Norton & Partners [Awaiting sign-off]
Sales · revision 2 · updated 9 Jun
- Client
- Norton & Partners
- Sent
- 5 Jun 2026
- Scope
- Consulting retainer (quarterly)
- Line items
- CONS-Q · SUP-STD
- Net total
- €12,000
- Margin
- 40%
Formula:- margin = (net_total − cost) / net_total
- cost = €7,200
- (12,000 − 7,200) / 12,000 = 40%
Run: Recomputed on quote send · 5 Jun 09:30 (auto)
- Validity
- 8 days left
Formula:- expires = sent_at + 14 days = 19 Jun
- days_left = expires − today
Run: Recomputed daily · 11 Jun 06:00 (auto)
- Follow-up
- 2nd reminder sent
Trigger:- if no client reply for 5 days
- channel: reminder email to client
Run: Sent to office@nortonpartners.com · 9 Jun 09:00 (done)
- CRM sync
- Stage → "Proposal sent"
Trigger:- PUT /crm/deals/{id}
- stage → "Proposal sent"
Run: Synced to deal #DL-5548 · 5 Jun 09:31 (done)
Source emails
- Consulting retainer request — from office@nortonpartners.com to sales@acme.com (3 Jun · 16:10): Hi, we're interested in a quarterly consulting retainer. Could you send us a proposal? Norton & Partners…
- Re: Consulting retainer — proposal — from sales@acme.com to office@nortonpartners.com (5 Jun · 09:30): Proposal attached: quarterly retainer (CONS-Q) + standard support (SUP-STD), net total €12,000. Valid 14 days. Sales — Acme…
- 2nd reminder — Q-3031 — from sales@acme.com to office@nortonpartners.com (9 Jun · 09:00): Hi, a reminder about proposal Q-3031 (€12,000), valid until 19 June. We remain at your disposal. Sales — Acme…
Q-3025 — Aurora Coffee [Awaiting sign-off]
Sales · revision 1 · updated 5 Jun
- Client
- Aurora Coffee
- Sent
- 5 Jun 2026
- Scope
- Bulk order — 200× pod dispensers
- Line items
- DISP-200 · SUP-6M
- Net total
- €7,400
- Requested discount
- 15%
Trigger:- if customer requested discount
- ask: review by sales
Run: Customer request under review (pending)
- Margin with discount
- 19%
Formula:- margin = (net_total − cost) / net_total
- cost = €5,994
- (7,400 − 5,994) / 7,400 = 19%
Run: Recomputed with requested discount · 5 Jun 11:00 (auto)
- Discount approval
- Discount >10% needs sales-lead OK
Trigger:- if discount > 10% (here 15%)
- approver: sales lead
Run: Approval requested · awaiting (pending)
- Validity
- 8 days left
Formula:- expires = sent_at + 14 days = 19 Jun
- days_left = expires − today
Run: Recomputed daily · 11 Jun 06:00 (auto)
- CRM sync
- Stage → "Proposal sent"
Trigger:- PUT /crm/deals/{id}
- stage → "Proposal sent"
Run: Synced to deal #DL-5542 · 5 Jun 11:01 (done)
Source emails
- Bulk order + discount — from buying@auroracoffee.com to sales@acme.com (4 Jun · 10:15): Hi, we'd like to order 200 pod dispensers. Given the volume, could we get a 15% discount? Aurora Coffee…
- Re: Bulk order — quote — from sales@acme.com to buying@auroracoffee.com (5 Jun · 11:00): Quote attached: 200× DISP-200 + 6 months support (SUP-6M), net total €7,400. The requested 15% discount is pending sales-lead approval. Sales — Acme…
Suppliers mailbox — orders@acme.com
Ask YI: Any supplier deliveries at risk this week?
3 inbound orders are at risk this week. PO-5210 from Marrow Freight (Milan → Naples) is awaiting approval — the route is over budget. PO-5210 (Marrow Freight) is already posted to your ERP; the supplier confirmation goes out as soon as it’s approved.
3 orders · at risk
- PO-5210 — Marrow Freight (8 Jun, v3): Pallet shipment Milan → Naples, €480 — over route budget.
- PO-5207 — Lynx Logistics (7 Jun, v2): Mixed pallet Turin → Rome, awaiting confirmed ETA.
- PO-5201 — BlueCargo (6 Jun, v4): Container Genoa → Palermo, customs hold.
Reports in detail
PO-5210 — Marrow Freight [Awaiting approval]
Suppliers · revision 3 · updated 8 Jun
- Supplier
- Marrow Freight
- Service
- Pallet shipment
- Route
- Milan → Naples
- Weight
- 1,200 kg
- Cost
- €480
- Doc references
- DOC-48120934 · DOC-48122071
- Budget variance
- +€80 over plan
Formula:- variance = cost − lane_budget
- lane_budget(Milan→Naples) = €400
- €480 − €400 = +€80
Run: Recomputed on quote receipt · 8 Jun 09:36 (auto)
- Route approval
- Routes >€400 need logistics OK
Trigger:- if cost > €400 (here €480)
- approver: logistics manager
Run: Approval requested from logistics@acme.com · awaiting (pending)
- Booking notice
- Confirmation sent to supplier
Trigger:- on status → "Booked"
- channel: email to supplier
Run: Sends to ops@marrowfreight.com once approved (pending)
- ERP posting
- Synced to orders API
Trigger:- POST /erp/orders
- map: PO fields → order
Run: Synced to order #ERP-5210 · 8 Jun 09:37 (done)
Source emails
- Pallet shipment quote Milan–Naples — from ops@marrowfreight.com to orders@acme.com (8 Jun · 09:35): Hello,
please find our quote for the pallet shipment Milan → Naples.
• 1,200 kg, 2 pallets
• Transit time 48h
• Total €480 (fuel surcharge included)
The direct route is €80 above the standard lane (€400) because of the holiday-week capacity. Let us know if w…
- Re: Pallet shipment quote — from orders@acme.com to ops@marrowfreight.com (8 Jun · 10:10): Hi,
thanks — the Milan → Naples quote at €480 is approved pending sign-off, as it's over our €400 lane cap.
Please share the consignment doc references so we can post the order.
Acme Orders…
- Booking slot confirmation — from ops@marrowfreight.com to orders@acme.com (8 Jun · 11:15): Confirmed — Wednesday slot booked for the Milan → Naples pallet shipment.
Consignment docs: DOC-48120934 and DOC-48122071. The driver will collect the 2 pallets (1,200 kg) on Wednesday morning.
Marrow Freight…
PO-5207 — Lynx Logistics [Awaiting ETA]
Suppliers · revision 2 · updated 7 Jun
- Supplier
- Lynx Logistics
- Service
- Mixed pallet
- Route
- Turin → Rome
- Weight
- 850 kg
- Cost
- €360
- Doc references
- DDT-47990123
- Budget variance
- −€20 (within budget)
Formula:- variance = cost − lane_budget
- lane_budget(Turin→Rome) = €380
- €360 − €380 = −€20
Run: Recomputed on quote receipt · 7 Jun 08:52 (auto)
- Confirmed ETA
- Awaiting from the supplier
Trigger:- if quote received and no ETA on file
- ask: supplier for ETA
Run: Request sent 7 Jun 09:30 → ops@lynxlogistics.com (pending)
- Booking notice
- Will be sent on approval
Trigger:- on status → "Booked"
- channel: email to supplier
Run: Awaiting confirmed ETA (pending)
- ERP posting
- Synced to the orders API
Trigger:- POST /erp/orders
- map: PO fields → order
Run: Synced to order #ERP-5207 · 7 Jun 08:52 (done)
Source emails
- Mixed pallet quote Turin–Rome — from ops@lynxlogistics.com to orders@acme.com (7 Jun · 08:50): Hi, attached is our quote for the Turin → Rome mixed pallet: 850 kg, total €360. The exact ETA will be confirmed shortly. Reference DDT-47990123. Lynx Logistics…
- Re: Mixed pallet quote — ETA — from orders@acme.com to ops@lynxlogistics.com (7 Jun · 09:30): Thanks, the €360 cost is within the lane budget (€380). Could you confirm the ETA so we can proceed with the booking? Acme Orders…
PO-5201 — BlueCargo [Customs hold]
Suppliers · revision 4 · updated 6 Jun
- Supplier
- BlueCargo
- Service
- 20' container
- Route
- Genoa → Palermo
- Weight
- 4,200 kg
- Cost
- €1,150
- Doc references
- DDT-47880441 · DDT-47880442
- Status
- Customs hold
- Customs documents
- Requested from the supplier
Trigger:- if customs hold and docs missing
- ask: supplier for customs documents
Run: Requested since 6 Jun 11:20 → ops@bluecargo.com (pending)
- Budget variance
- +€90 over plan
Formula:- variance = cost − lane_budget
- lane_budget(Genoa→Palermo) = €1,060
- €1,150 − €1,060 = +€90
Run: Recomputed on quote receipt · 6 Jun 09:15 (auto)
- Approval
- Costs >€1,000 need logistics OK
Trigger:- if cost > €1,000 (here €1,150)
- approver: logistics manager
Run: Approval requested from logistics@acme.com · awaiting (pending)
- ERP posting
- Synced to the orders API
Trigger:- POST /erp/orders
- map: PO fields → order
Run: Synced to order #ERP-5201 · 6 Jun 09:15 (done)
Source emails
- Container Genoa–Palermo on customs hold — from ops@bluecargo.com to orders@acme.com (6 Jun · 11:05): Hi, the Genoa → Palermo container (4,200 kg, €1,150, DDT-47880441 and DDT-47880442) is on customs hold — some customs documents are missing. BlueCargo…
- Re: Container hold — documents — from orders@acme.com to ops@bluecargo.com (6 Jun · 11:20): Thanks for flagging. Please send the list of missing customs documents. The cost (€1,150) exceeds the lane budget (€1,060), so it's pending logistics approval. Acme Orders…
Not just order. Control.
YI doesn't just organize your emails. It turns scattered conversations into data you can act on.
- See everything at a glance. Every relevant email becomes an entry in a structured card. No more inbox searches, no more endless threads to re-read: open the report and instantly know the status of every deal, every order, every request.
- Find who said what, and when. Need to know when a supplier confirmed a price, or who approved a change three weeks ago? YI keeps track of everything: every piece of data has a sender, a date, and context. Reconstructing facts that today costs you hours becomes an instant lookup.
- Compare, filter, decide. When information has a uniform structure, you can do what was previously impossible: compare offers, spot recurring delays, understand where you lose time or money. It's business intelligence on data that previously existed in no database.
- Let YI do the chasing. Missing data? YI requests it. A deadline approaching? YI alerts you. A pending approval? YI follows up. The manual follow-up — the one someone on your team does by hand today, or that nobody does — becomes automatic.
- YI is secure: only you can access your company's data.
- YI is easy: zero integrations, zero development, zero training.
- YI is flexible: automatically collects data from emails and attachments.
- YI is proactive: notifies, requests missing data, obtains approvals.
- YI is patient: distinguishes different topics and remembers them all.
- YI is friendly: access your reports or chat your questions.
What report would you like on your desk tomorrow?
Customer orders · Quotes & proposals · Support requests · Vendor management · Internal approvals · Complaints & returns · Deadlines & renewals · Client onboarding · Project updates · Expenses & receipts
Connect your inbox → Only you can access your data.
User manual · Outlook add-in help · Pricing · About · Contacts · Security
MILANO | VERONA, Italy.